近年來,隨著我國制造業與物流業的迅速發展,自動化技術與信息技術獲得快速提高,自動化立體倉庫成為當前制造企業與物流企業最受歡迎的實用利器。目前,自動化立體倉庫由于其作業高效性在制造企業得到越來越廣泛的應用。今天,讓我們來看一看自動化立體倉庫的分類與優勢。
自動化立體倉庫的分類

In recent years, with the rapid development of manufacturing and logistics industry in our country, obtain rapidly improve automation technology and information technology, automatic solid warehouse is a current manufacturing enterprise and logistics enterprise one of the most popular and practical tool.
 

這里,我們采用按照貨架的構造分類有:
單元貨格式:這是比較常見的模式,貨架之間有巷道,占據整個倉庫的三分之一左右。
貫通式:取消位于各排貨架之間的巷道,每一層、同一列的貨物互相貫通,形成能一次存放多貨物單元的通道,而在另一端由出庫起重機取貨。適用于貨物品種不多而數量又相對較大的倉庫。

Automatic three-dimensional warehouse classification.
Here, we use the structure of the shelves according to the classification:
Unit cargo format: this is a more common pattern, with a roadway between the shelves, occupying about a third of the entire warehouse.

水平/垂直旋轉式:貨架可以在水平面內或垂直面內沿環形路線運行。每組貨架由若干獨立的貨柜組成,用鏈式傳送機將貨柜串連起來。給出出庫指令后,所需的貨物所在的貨架會自動轉到出貨口。適合小件物品的揀選作業,適用于作業頻率要求不太高的場合。

Through type: cancel in roadway between each row of shelves, each layer, the interpenetration of the goods in the same column, can form a storage unit goods more channels, and at the other end by outbound crane. It is suitable for warehouse with relatively few goods and relatively large quantity.
自動化立體倉庫的優勢

1、 提高空間利用率
充分利用了倉庫的垂直空間,單位面積的存儲量遠大于傳統倉庫。此外,傳統倉庫必須將物品歸類存放,造成大量空間閑置,自動化立體倉庫可以隨機存儲,任意貨物存放于任意空倉內,由系統自動記錄準確位置,大大提高了空間的利用率。

Horizontal/vertical rotation: the shelf can be run in the horizontal plane or in the vertical plane. Each group of shelves consists of several separate containers connected by a chain conveyor. After giving the warehouse instruction, the goods on the shelf will be automatically transferred to the delivery port.

2、 實現物料先進先出
傳統倉庫由于空間限制,將物料碼放堆砌,常常是先進后出,導致物料積壓浪費。自動化立體倉庫系統能夠自動綁定每一票物料的入庫時間,自動實現物料先進先出。

Suitable for small items, suitable for situations where the frequency of operation is not too high.
The advantages of automated warehouse.
1. Improve space utilization.

3、 智能作業賬實時同步
傳統倉庫的管理涉及大量的單據傳遞,且很多由手工錄入,流程冗雜且容易出錯。立體倉庫管理系統與ERP系統對接后,從生產計劃的制定開始到下達貨物的出入庫指令,可實現全流程自動化作業,且系統自動過賬,保證了信息準確及時,避免了賬實不同步的問題。

The vertical space of the warehouse is fully utilized, and the storage capacity of unit area is much larger than that of traditional warehouse. In addition, the traditional items must be classified storage warehouse, caused a large number of idle space, automated stereoscopic warehouse can be stored randomly,

4、 滿足貨物對環境的要求
相較傳統倉庫,能較好地滿足特殊倉儲環境的需要,如避光、低溫、有毒等特殊環境。保證貨品在整個倉儲過程的安全運行,提高了作業質量。

 Realize the material advance first.
Due to the space limitation, the traditional warehouse can be piled up with materials, which is often advanced, resulting in a waste of materials. The automatic three-dimensional warehouse system can automatically bind the warehouse time of each batch of materials, and automatically realize the material advance first.

5、可追溯
通過條碼技術等,準確跟蹤貨物的流向,實現貨物的可追溯。

6、節省人力資源成本
立體倉庫內,各類自動化設備代替了大量的人工作業,大大降低人力資源成本。

7、及時處理呆滯料
部分物料由于技改或產品過時變成了呆料,忘記入賬變成了死料,不能及時清理,既占用庫存貨位,又占用資金。立體倉庫系統的物料入庫,自動建賬,不產生死料,可以搜索一定時期內沒有操作的物料,及時處理呆料。

By means of barcode technology, it can accurately track the flow of goods and realize the traceability of goods.
6. Saving human resource cost.
In the three-dimensional warehouse, various kinds of automatic equipment replace a lot of manual work, greatly reducing the human resource cost.
7. Deal with dull materials in a timely manner.

自動化立體倉庫是物流倉儲中出現的新概念,也是當前技術水平較高的形式,通過立體倉庫設備可實現倉庫高層合理化,存取自動化,操作簡便化。易往信息作為我國優秀的智能工廠整體解決方案提供商,在深刻總結我國制造企業在轉型升級過程中遇到的倉儲管理問題的基礎上,獨立自主研發出最新的倉儲管理產品——易往FlexEngine-Venus倉儲管理系統。針對企業生產出現的作業效率低、上架憑人工、庫存結構落后、庫存積壓多、爆倉、倉儲混亂、員工責任不明確等問題,通過流程化數據對接,實現上下游數據的實時傳遞;通過規范化的庫存管理,引入先進的庫存管理理念和作業方法,極大地降低了庫存積壓、爆倉等問題;通過智慧化倉庫管理,使上架、揀貨更高效;標準化的庫內作業流程,有效保證庫存效率與準確率,通過易往Venus助力企業實現智能化倉儲管理,為企業實現智能制造企業奠定堅實基礎。

Automatic solid warehouse is a new concept in logistics, warehousing, and the current technical level is higher, in the form of rationalization through three-dimensional warehouse equipment can realize high-level, access to automation, easy to operate. Easy to information as a excellent intelligent plant overall solution provider in China, in the summary in encountered in the process of transformation and upgrading of Chinese manufacturing enterprise warehouse management problem, on the basis of independent research and development the latest warehouse management product - easy to FlexEngine - Venus warehouse management system. In view of the enterprise production efficiency is low, shelves by artificial backward, the structure of the inventory, inventory backlog more chaos, blasting warehouse, storage, staff problems such as unclear responsibility, through routing data docking, realize the upstream and downstream data real-time transmission; Through the

 

【此文章原創來自于158機床網轉載請注明出處】

 

最近更新

广东快乐十分走势图一定牛 欧美av种子快播 大富翁捕鱼下载 网赚项目 华东15选5 安徽十一选五 大众麻将手机版下载 有坂深雪所有作品 白小姐精选一肖一码 三肖必中特马期期淮 江西十一选五走势图彩经网 最准高手中一尾特平 闲来贵州麻将下载 湖北十一选五基本走势图带连线 河南11选五开奖号码 腾讯分分彩开奖记录 财神爷网站资料